Machined Wire is obtained by hot lamination. With a round transversal section, that product is provided in 650 kg rolls, tied in bundles with approximately 1.3 tons, in 1006, 1008, 1010, 1012, and 1045 chemical ranges, and is destined to draw-wiring for nails, clamps, hooks, annealed wires, among others, meeting the requirements of ABNT/NBR 6354/80 standard.
Votoraço Machined Wire can also be provided and destined to the manufacturing of cold formed nuts and screws under request, according to ABNT/NBR 6325/85 standard.
Main characteristics of product according to ABNT/NBR (Brazilian Association of Technical Standards) 6354/80:
|
Diameter (mm) |
Diameter (mm) |
Maximum Ovalization (mm) |
|
Nominal |
Min. |
Max. |
|
| 5,50 |
5,50 |
5,20 |
5,80 |
0,50 |
| 6,00 |
6,00 |
5,70 |
6,30 |
0,50 |
| 6,35 |
6,35 |
6,05 |
6,65 |
0,50 |
| 7,94 |
7,94 |
7,64 |
8,24 |
0,50 |
| 9,53 |
9,53 |
9,13 |
9,93 |
0,65 |
| 12,70 |
12,70 |
12,30 |
13,10 |
0,65 | |